Respiratory Care
Pulse Oximeter
   - Fingertip Pulse Oximeter
   - Handheld Pulse Oximeter
   - Table Top Pulse Oximeter
áá -  Piston Based
áá -  UltraSonic
      - Manual CPAP
      - Auto CPAP
Respiratory Care Accessories
      - CPAP Mask
      - Full Face Mask
      - CPAP Nasal Pillow Mask

Connect with us:  

Contact me now:



  • The System utilizes PSA (Pressure Swing Absorption) for oxygen generation.
  • Self-contained system for the production of high concentration oxygen, using Molecular Sieve to separate the oxygen from the nitrogen in the ambient air.
  • Oxygen is concentrated and redirected for use at front & Nitrogen is ejected
  • Purity of Oxygen accords to industry standards
  • Low consumption of power and low cost of oxygen production


Flow Rate 0-5L/min
Purity 93 ±3%
Outlet Pressure (Mpa) 0.04-0.07
Sound Level ≤50db
Power AC 230V, 50Hz (AC 220V/110v±10%, 50/60±lHz are available)
Power Consumption ≤480W
LCD Display Switch times, Operating pressure, Present Working Time, Accumulating Time, Presetting Time from 10 mins to 40 hours
Alarm Power failure alarm, High & Low Pressure alarm
Net Weight 25Kgs.
Size (mm) 365 x 375 x 600mm

Low purity alarm : when oxygen purity is above 82%, it will give blue light, when the purity is
below 82% (82% not included), it will give red light
Maintenance alarm : alarm for maintenance after 3000 hours operation
Alarm for high temperature inside systems above 50 C
Pulse Oximeter : in-built pulse oximeter is available for monitoring patient oxygen saturation on site

Standard Accessories :
One humidifier Bottle, one Nasal Canula with extension tubing, One air filter set

Other Models Available :
5 lit. with dual flow
5 lit. with in-built nebuliser for simultaneous atomizing therapy
5 lit. with dual flow & in-built nebuliser for simultaneous atomizing therapy
10 lit./min models also available

 ęCopyright MEDICAL POINT, Delhi (India) All rights reserved throughout the World Site Designed & Maintained by mark design